Jump to content
Rob2197

Sun rays/ Heaven rays

By Rob2197, in Programming

Recommended Posts

Rob2197    0

Rob2197
Posted (edited)

I'm looking for some rays of light effect that look pretty cool, I've looked for them for a while and haven't had any luck, if anyone could direct them to

a script that allows me to do something like this picture. Thanks in advance to anyone who responds, like always :) !

 

post-10951-0-83879600-1339613680_thumb.jpg

Edited by Rob2197

Share this post

Link to post
Share on other sites

Virus    24

Virus
Posted (edited)

EDIT: Here are some picture you can use to create that affect and the script

 

script

 

 

#==============================================================================
#
# â–¼ Yami Script Ace - Overlay Mapping
# -- Last Updated: 2011.12.29
# -- Level: Easy
# -- Requires: n/a
# -- Credit: Hanzo Kimura for Original Script
#
#==============================================================================
$imported = {} if $imported.nil?
$imported["YSA-OverlayMapping"] = true
#==============================================================================
# â–¼ Updates
# =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
# 2011.12.29 - Bugfix for transfer.
# 2011.12.10 - Started and Finished Script.
#
#==============================================================================
# â–¼ Introduction
# =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
# This script based on Hanzo Kimura's idea. This will automatically load map's
# overlay by map ID, and a map can have more than one image per layer, so you
# don't have to create two or more map just for day/night or when an event occur.
#
#==============================================================================
# â–¼ Instructions
# =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
# Create a folder in Graphics and name it Overlay.
# Put all of your overlay into Graphics/Overlay.
# Your overlay file will have the name: "Filename Prefix" + Map-ID + "-" + Number
# which "Filename Prefix" is the one you will config below
# Map-ID is your map's ID
# Number is 1, 2, 3, ... using for Overlay Variables.
#
# Example: Graphics/Overlay/ground2-1.png
# Which means this will be ground layer, for map 2, variable = 1
#
# Light/Shadow must be .jpg
# Parallax/Ground must be .png
#
#==============================================================================
module YSA
 module OVERLAY
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# - Overlay Switches -
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# These are switches which are enable overlay layers. Turn them on to show
# them in your maps.
#--------------------------------------------------------------------------
# Default: ON
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
LIGHT_SWITCH = 1		# Turn on/off light layer
SHADOW_SWITCH = 2	   # Turn on/off shadow layer
PARALLAX_SWITCH = 3	 # Turn on/off parallax layer
GROUND_SWITCH = 4	   # Turn on/off ground layer
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# - Overlay Variables -
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# A map can have more than one image per layer, that means you can have a
# different light/shadow for day and night, or have a different ground when
# an event occured.
#--------------------------------------------------------------------------
# Default: 1
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
LIGHT_VARIABLE = 2	  # Switch to another light
SHADOW_VARIABLE = 2	 # Switch to another shadow
PARALLAX_VARIABLE = 1   # Switch to another parallax
GROUND_VARIABLE = 1	 # Switch to another ground

#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# - Filename Prefix -
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# This will make this script automatic, it will check if there are layers in
# overlay folder
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
LIGHT = "light"		 # Light layer's filename prefix
SHADOW = "shadow"	   # Shadow layer's filename prefix
PARALLAX = "par"		# Parallax layer's filename prefix
GROUND = "ground"	   # Ground layer's filename prefix

#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# - Overlay Opacity -
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# This will make this script automatic, it will check if there are layers in
# overlay folder
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
GROUND_OPACITY = 255
PARALLAX_OPACITY = 255
LIGHT_OPACITY = 128
SHADOW_OPACITY = 96
 end #OVERLAY
end # YSA
#==============================================================================
# â–¼ Editting anything past this point may potentially result in causing
# computer damage, incontinence, explosion of user's head, coma, death, and/or
# halitosis so edit at your own risk.
#==============================================================================
#==============================================================================
# â–  Cache
#==============================================================================
module Cache

 #--------------------------------------------------------------------------
 # new method: overlay
 #--------------------------------------------------------------------------
 def self.overlay(filename)
load_bitmap("Graphics/Overlay/", filename)
 end

end # Cache
#==============================================================================
# â–  DataManager
#==============================================================================
module DataManager

 #--------------------------------------------------------------------------
 # alias method: setup_new_game
 #--------------------------------------------------------------------------
 class <<self; alias ovm_setup_new_game setup_new_game; end
 def self.setup_new_game
ovm_setup_new_game
setup_overlay_mapping
 end

 #--------------------------------------------------------------------------
 # new method: setup_overlay_mapping
 #--------------------------------------------------------------------------
 def self.setup_overlay_mapping
# Control switches
$game_switches[YSA::OVERLAY::LIGHT_SWITCH] = true
$game_switches[YSA::OVERLAY::SHADOW_SWITCH] = true
$game_switches[YSA::OVERLAY::GROUND_SWITCH] = true
$game_switches[YSA::OVERLAY::PARALLAX_SWITCH] = true

# Control variables
$game_variables[YSA::OVERLAY::LIGHT_VARIABLE] = 1
$game_variables[YSA::OVERLAY::SHADOW_VARIABLE] = 1
$game_variables[YSA::OVERLAY::GROUND_VARIABLE] = 1
$game_variables[YSA::OVERLAY::PARALLAX_VARIABLE] = 1
 end

end # DataManager
#==============================================================================
# â–  Spriteset_Map
#==============================================================================
class Spriteset_Map

 #--------------------------------------------------------------------------
 # alias method: initialize
 #--------------------------------------------------------------------------
 alias overlay_initialize initialize
 def initialize
overlay_initialize
create_overlay_map
update
 end

 #--------------------------------------------------------------------------
 # new method: check_file
 #--------------------------------------------------------------------------
 def check_file(type)
filename = "Graphics/Overlay/"
filename += YSA::OVERLAY::GROUND if type == "ground"
filename += YSA::OVERLAY::LIGHT if type == "light"
filename += YSA::OVERLAY::SHADOW if type == "shadow"
filename += YSA::OVERLAY::PARALLAX if type == "par"
filename += $game_map.map_id.to_s
filename += "-" + $game_variables[YSA::OVERLAY::GROUND_VARIABLE].to_s if type == "ground"
filename += "-" + $game_variables[YSA::OVERLAY::LIGHT_VARIABLE].to_s if type == "light"
filename += "-" + $game_variables[YSA::OVERLAY::SHADOW_VARIABLE].to_s if type == "shadow"
filename += "-" + $game_variables[YSA::OVERLAY::PARALLAX_VARIABLE].to_s if type == "par"
filename += ".jpg" if type == "light" || type == "shadow"
filename += ".png" if type == "par" || type == "ground"
return FileTest.exist?(filename)
 end

 #--------------------------------------------------------------------------
 # new method: create_overlay_map
 #--------------------------------------------------------------------------
 def create_overlay_map
w = Graphics.width
h = Graphics.height
@current_light = 0
@current_shadow = 0
@current_par = 0
@current_ground = 0
# Ground Layer
@ground = Sprite.new(@viewport1)
@ground.z = 1
@ground.opacity = YSA::OVERLAY::GROUND_OPACITY
# Light Layer
@light_viewport = Viewport.new(0, 0, w, h)
@light_viewport.z = 10
@light = Sprite.new(@light_viewport)
@light.opacity = YSA::OVERLAY::LIGHT_OPACITY
@light.blend_type = 1
# Shadow Layer
@shadow_viewport = Viewport.new(0, 0, w, h)
@shadow_viewport.z = 9
@shadow = Sprite.new(@shadow_viewport)
@shadow.opacity = YSA::OVERLAY::SHADOW_OPACITY
@shadow.blend_type = 2
# Parallax Layer
@par_viewport = Viewport.new(0, 0, w, h)
@par_viewport.z = 8
@par = Sprite.new(@par_viewport)
@par.opacity = YSA::OVERLAY::PARALLAX_OPACITY
 end

 #--------------------------------------------------------------------------
 # alias method: dispose_parallax
 #--------------------------------------------------------------------------
 alias overlay_dispose_parallax dispose_parallax
 def dispose_parallax
overlay_dispose_parallax
dispose_overlay_map
 end

 #--------------------------------------------------------------------------
 # new method: dispose_overlay_map
 #--------------------------------------------------------------------------
 def dispose_overlay_map
@ground.dispose
@shadow_viewport.dispose
@light_viewport.dispose
@light.dispose
@shadow.dispose
@par_viewport.dispose
@par.dispose
 end

 #--------------------------------------------------------------------------
 # alias method: update_parallax
 #--------------------------------------------------------------------------
 alias overlay_update_parallax update_parallax
 def update_parallax
overlay_update_parallax
# Parallax
if @ground != nil
  if check_file("ground")
	@ground.visible = $game_switches[YSA::OVERLAY::GROUND_SWITCH] if @ground.visible != $game_switches[YSA::OVERLAY::GROUND_SWITCH]
	@ground.ox = $game_map.display_x * 32 if @ground.ox != $game_map.display_x * 32
	@ground.oy = $game_map.display_y * 32 if @ground.oy != $game_map.display_y * 32
	@ground.tone = $game_map.screen.tone
	if @current_ground != $game_variables[YSA::OVERLAY::GROUND_VARIABLE]
	  filename = YSA::OVERLAY::GROUND
	  filename += $game_map.map_id.to_s
	  filename += "-" + $game_variables[YSA::OVERLAY::GROUND_VARIABLE].to_s
	  @ground.bitmap = Cache.overlay(filename)
	  @current_ground = $game_variables[YSA::OVERLAY::GROUND_VARIABLE]
	end
  else
	@ground.visible = false
  end
end
# Light
if @light != nil && @light_viewport != nil
  if check_file("light")
	@light.visible = $game_switches[YSA::OVERLAY::LIGHT_SWITCH] if @light.visible != $game_switches[YSA::OVERLAY::LIGHT_SWITCH]
	@light.ox = $game_map.display_x * 32 if @light.ox != $game_map.display_x * 32
	@light.oy = $game_map.display_y * 32 if @light.oy != $game_map.display_y * 32
	@light.tone = $game_map.screen.tone
	@light_viewport.ox = $game_map.screen.shake
	@light_viewport.color = $game_map.screen.flash_color
	if @current_light != $game_variables[YSA::OVERLAY::LIGHT_VARIABLE]
	  filename = YSA::OVERLAY::LIGHT
	  filename += $game_map.map_id.to_s
	  filename += "-" + $game_variables[YSA::OVERLAY::LIGHT_VARIABLE].to_s
	  @light.bitmap = Cache.overlay(filename)
	  @current_light = $game_variables[YSA::OVERLAY::LIGHT_VARIABLE]
	end
  else
	@light.visible = false
  end  
end
# Shadow
if @shadow != nil && @shadow_viewport != nil
  if check_file("shadow")
	@shadow.visible = $game_switches[YSA::OVERLAY::SHADOW_SWITCH] if @shadow.visible != $game_switches[YSA::OVERLAY::SHADOW_SWITCH]
	@shadow.ox = $game_map.display_x * 32 if @shadow.ox != $game_map.display_x * 32
	@shadow.oy = $game_map.display_y * 32 if @shadow.oy != $game_map.display_y * 32
	@shadow.tone = $game_map.screen.tone
	@shadow_viewport.ox = $game_map.screen.shake
	@shadow_viewport.color = $game_map.screen.flash_color
	if @current_shadow != $game_variables[YSA::OVERLAY::SHADOW_VARIABLE]
	  filename = YSA::OVERLAY::SHADOW
	  filename += $game_map.map_id.to_s
	  filename += "-" + $game_variables[YSA::OVERLAY::SHADOW_VARIABLE].to_s
	  @shadow.bitmap = Cache.overlay(filename)
	  @current_shadow = $game_variables[YSA::OVERLAY::SHADOW_VARIABLE]
	end
  else
	@shadow.visible = false
  end
end
# Parallax
if @par != nil && @par_viewport != nil
  if check_file("par")
	@par.visible = $game_switches[YSA::OVERLAY::PARALLAX_SWITCH] if @par.visible != $game_switches[YSA::OVERLAY::PARALLAX_SWITCH]
	@par.ox = $game_map.display_x * 32 if @par.ox != $game_map.display_x * 32
	@par.oy = $game_map.display_y * 32 if @par.oy != $game_map.display_y * 32
	@par.tone = $game_map.screen.tone
	@par_viewport.ox = $game_map.screen.shake
	@par_viewport.color = $game_map.screen.flash_color
	if @current_par != $game_variables[YSA::OVERLAY::PARALLAX_VARIABLE]
	  filename = YSA::OVERLAY::PARALLAX
	  filename += $game_map.map_id.to_s
	  filename += "-" + $game_variables[YSA::OVERLAY::PARALLAX_VARIABLE].to_s
	  @par.bitmap = Cache.overlay(filename)
	  @current_par = $game_variables[YSA::OVERLAY::PARALLAX_VARIABLE]
	end
  else
	@par.visible = false
  end
end
 end

end # Spriteset_Map
#==============================================================================
# â–  Scene_Map
#==============================================================================
class Scene_Map < Scene_Base

 #--------------------------------------------------------------------------
 # alias method: post_transfer
 #--------------------------------------------------------------------------
 alias overlay_post_transfer post_transfer
 def post_transfer
@spriteset.dispose_overlay_map
@spriteset.create_overlay_map
@spriteset.update
overlay_post_transfer
 end
end # Scene_Map
#==============================================================================
#
# â–¼ End of File
#
#==============================================================================

 

 

 

image

 

 

light30.jpg

light26.jpg

light25.jpg

light24.jpg

light23.jpg

light22.jpg

light21.jpg

light11.jpg

light7.jpg

light5.jpg

 

Edited by Virus00
  • Like 2

Share this post

Link to post
Share on other sites

Galv    1,387

Galv
Posted

Please don't necropost or try to hijack another topic. The instructions to use the script posted above are written at the top of the script. If you still need help I recommend starting your own topic.

 

Closing this one

Share this post

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Go To Topic Listing Programming

  • Recently Browsing   0 members

    No registered users viewing this page.

×
Top ArrowTop Arrow Highlighted